After your net meter is installed, your electricity bill shows three numbers that matter: units imported from the grid, units exported by your solar system, and the net units you are billed for. Fixed charges stay. Understanding these lines lets you confirm the system is working and that the DISCOM is crediting your exports correctly.
Key Takeaways
- Import − export = net units billed; if exports exceed imports, the surplus is carried forward as credit.
- Fixed or demand charges continue even when net units are zero.
- Your total solar generation is not on the bill — it is on the inverter app.
- Monsoon bills rise and spring bills fall; judge the system on the yearly total.
- Check the first two bills carefully — meter set-up errors are easiest to fix early.
The new lines on your bill
| Line | What it means |
|---|---|
| Import reading / units imported | Electricity you took from the grid — mostly evenings, nights and cloudy hours |
| Export reading / units exported | Surplus solar electricity your system sent to the grid |
| Net units | Import minus export — the units you pay energy charges on |
| Carried-forward credit | Export units in excess of imports, banked for later months |
| Fixed / demand charge | Charge for the connection, payable regardless of units |
Labels differ between MPMKVVCL, MPPKVVCL and CSPDCL bills, and some show readings as kWh import (kWh-I) and export (kWh-E). The principle is the same.
A worked example
A Gwalior home with a 3 kW system in April: the inverter app shows 450 units generated. The family used 180 of those directly during the day, so 270 were exported. In the evenings and at night they imported 300 units. The bill shows import 300, export 270, net 30 units. The family pays energy charges on 30 units plus the fixed charge — instead of on 480 units before solar. Notice that the 180 units used directly never appear on the bill at all; they simply reduced what had to be imported.
Why your generation is not on the bill
The net meter only sees electricity crossing between your home and the grid. Units your appliances use straight from the panels never pass through the meter. That is why the inverter app is the place to see how much your system actually produced. To estimate your saving, compare the bill with the same month in the year before solar, or use the app's total generation multiplied by your tariff.
Why some months still show a bill
- Monsoon months — July and August generation falls by a third or more, so imports exceed exports.
- Fixed charges — always payable.
- New loads — a new AC or more people at home raises imports.
- Settlement timing — credit from a high-export month is set off in later bills according to the DISCOM's billing cycle and settlement period.
Judge the system on the yearly total of imports and exports, not on a single month.
What to check every month
- Export units are shown and are non-zero on sunny months — if exports are zero, the meter may not be recording correctly.
- Readings are actual, not "average" or "estimated" — estimated bills can ignore exports.
- Net units equal import minus export, and any carried-forward credit is applied.
- The app's monthly generation is in line with the season — about 120–130 units per kW in spring, less in the monsoon.
Common problems and what to do
- Exports not shown — the meter may not have been configured for net metering. Raise it with the DISCOM office with the commissioning documents; your installer can help.
- Estimated bills — request a meter reading; estimated billing can miss exports entirely.
- Bill higher than expected — compare app generation with past months; a drop points to dust, a tripped string or an inverter fault.
- Credit not carried forward — check with the DISCOM how credit is shown on your tariff category and settlement period.
Commercial and three-phase connections
Shops, offices and factories on non-domestic or industrial tariffs see the same import, export and net lines, but their bills may also show maximum demand, power factor and time-of-day components. Solar reduces energy units but does not always reduce the maximum demand recorded on a cloudy afternoon, so demand charges can remain. Businesses should track energy units and demand separately when judging savings, and ask their installer to model both.
Keep a simple record
A small monthly table — import, export, net units, bill amount and the app's generation — takes two minutes and makes problems obvious. After a year you will have the full picture of how your system performs through the seasons, and any meter or billing error will stand out immediately.
Annual settlement
Under net-metering rules, surplus that remains after setting exports against imports over the settlement period is paid or adjusted at the rate the DISCOM's regulations specify, which is lower than the retail tariff. That is why systems should be sized to your consumption: a modest yearly surplus is fine, a large one earns little.
Moving house or changing the connection
If the property is sold or the connection is transferred to a new name, inform the DISCOM so the net-metering agreement moves with it. Any credit balance and the net-meter arrangement are handled according to the DISCOM's procedure, and keeping the commissioning documents makes the transfer simple.
Need help reading your bill?
Send a photo of your latest bill and a screenshot of your inverter app to Sunvera Energy on WhatsApp at +91 77103 07937. We will check that imports and exports are being recorded correctly and that your system is producing what it should — for systems installed by us or by others.
Frequently Asked Questions
Look for units imported, units exported and net units. Net units — import minus export — are what you pay energy charges on, plus the fixed charge. Exports in excess of imports are carried forward as credit according to your DISCOM's billing rules.
The net meter only records electricity crossing between your home and the grid. Solar units used directly by your appliances never pass through it. The inverter app shows total generation.
Fixed charges are always payable, monsoon months generate less, new appliances raise imports, and credit from high-export months is applied according to the billing cycle. Judge the system on the yearly total, not one month.
The meter may not be configured or read correctly for net metering, or the bill may be estimated. Raise it with your DISCOM office with the commissioning documents; your installer can help resolve it.
Get a free site survey & PM Surya Ghar subsidy guidance.

