☀ PM Surya Ghar Registered EPC

How Much Solar Does Your Shivpuri Home Need? Sizing From Your MPMKVVCL Bill

Solar Basics 📅 12 Nov 2026 ⏱ 5 min read
Close view of rooftop solar panels sized for a home in Shivpuri

The right solar size for a Shivpuri home is hiding in your electricity bills. Add up twelve months of units on your MPMKVVCL bills and divide by about 1,450–1,500 — what one kilowatt of panels produces in a year in the district. A home using 4,400 units a year needs about 3 kW; one using 2,900 units needs 2 kW. Then three checks — sanctioned load, roof space and future plans — confirm the answer.

Key Takeaways

  • Yearly units ÷ 1,450–1,500 = the kW your Shivpuri home needs.
  • Use twelve months of bills, never just one summer bill.
  • Solar capacity generally cannot exceed your sanctioned load.
  • Each kW needs about 100 sq ft of shade-free roof.
  • Very low-use homes may save less than expected — check before buying.

Step 1: Add up a year of units

Every MPMKVVCL bill shows the units consumed in that billing period. Collect the last twelve, or open the consumer history in the DISCOM app or portal, and add them up. In Shivpuri, a home with coolers and one AC often uses about 150–200 units in winter months and 450–550 in May and June, for a total of around 4,300–4,500 units a year. Using a full year matters because the swing between seasons is large.

Step 2: Divide by 1,450–1,500

Yearly unitsMonthly averageSizeNet cost after subsidy
1,400–1,500≈ 1201 kW≈ ₹48,000
2,800–3,000≈ 2402 kW≈ ₹80,000–90,000
4,300–4,500≈ 3653 kW≈ ₹1,02,000–1,22,000
7,000–7,500≈ 6005 kW≈ ₹1,97,000–2,22,000

If your total falls between two sizes, round down slightly rather than up. A system that covers 90–95% of your use pays back faster than one that covers 120%.

Step 3: Check your sanctioned load

Look for "sanctioned load" or "contract load" on the bill. Under net-metering rules, the solar capacity generally cannot be more than this figure. Many houses in Shivpuri, especially in villages and older parts of town, were connected years ago at 1 kW or 2 kW and have since added coolers, an AC and a pump. If your bill says 1 kW and you need 3 kW, a load increase must be applied for with MPMKVVCL first. Sunvera files it together with the net-metering application, so it adds a few weeks but no extra running around.

Step 4: Measure your roof

Each kW needs about 100 sq ft of roof with no shadow between roughly 9 am and 4 pm. A 3 kW system needs about 300 sq ft. Watch for the water tank, the stair room, a neighbour's taller house and trees, especially in winter when the sun is lower and shadows longer. Old stone-slab roofs can carry panels but need careful mounting. If your terrace is used for drying grain or sleeping in summer, an elevated structure keeps it free.

Step 5: Think about the next few years

Planning to add an AC, a second floor or a bigger pump? Include their expected use. A 1.5-ton AC used through a Shivpuri summer can add 700–900 units a year — roughly half a kW of panels. It is cheaper to size for it now than to add a second small system later, but only include plans you are fairly sure of.

Common sizing mistakes

  • Sizing from the May bill. The system ends up too big and exports large winter surpluses at a lower settlement rate.
  • Ignoring the sanctioned load. The application stalls until the load is increased.
  • Counting a rented floor's meter. Each PM Surya Ghar application covers one domestic connection in the applicant's name.
  • Forgetting fixed charges. They stay on the bill even with solar, so the bill rarely becomes exactly zero.

Two Shivpuri examples

A town home near Court Road. Twelve bills add up to 4,350 units, with 520 units in May and 170 in January. Dividing by 1,450–1,500 gives just under 3 kW. The sanctioned load is 3 kW, the roof has 380 sq ft free of shadow, and the family has no new appliances planned. The answer is 3 kW, at about ₹1,02,000–1,22,000 after the ₹78,000 subsidy, saving roughly ₹25,000–31,000 a year.

A village home near Kolaras. The bills total 2,700 units — lights, fans, two coolers, a fridge and a small pump — but the connection is sanctioned at only 1 kW. The calculation says 2 kW. Sunvera applies to MPMKVVCL for a load increase alongside the net-metering application, and a 2 kW system costing about ₹80,000–90,000 after the ₹60,000 subsidy saves around ₹16,000–20,000 a year. If the family had sized from the May bill alone, they would have bought 3 kW and sent much of it to the grid at a low rate.

When the honest answer is smaller

Some village homes in Pohri, Badarwas or Narwar use well under 100 units a month and already pay a subsidised bill under the state's scheme for low-consumption households. For them, even 1 kW saves less than in a town home, and the payback is longer. Solar can still make sense, especially with the ₹30,000 subsidy on 1 kW, but it should be a decision made with real numbers.

Let us check it for you

If adding up bills sounds tedious, WhatsApp photos of your twelve MPMKVVCL bills to +91 77103 07937, or bring them to the Sunvera Energy head office at Rannod Road, Bijasen Mandir Colony, Pichhore. The team will read the units, sanctioned load and tariff, and give you the size, net cost and expected saving the same day, followed by a free roof survey anywhere in Shivpuri district.

Frequently Asked Questions

Ready to go solar?

Get a free site survey & PM Surya Ghar subsidy guidance.