☀ PM Surya Ghar Registered EPC
Chhattisgarh · North Chhattisgarh

Solar for Factory in Korba — Fly-Ash Brick Plants and Small Manufacturing Units

Solar for factory in Korba is a strong fit for the small and medium units that have grown around the city's power and mining economy. Fly-ash brick plants turn the power stations' ash into building material using mixers, presses and conveyors that run all day; fabrication shops, flour mills, ice factories and packaging units around Transport Nagar and the industrial roads run day shifts too. These units pay commercial or industrial tariffs for every unit. A 25 kW plant costs about ₹12.5–13.5 lakh, larger plants about ₹45,000–50,000 per kW, and a plant sized to the day-shift load typically pays back in three to four years before tax benefits.

Korba's small factories

Korba's large plants support a ring of smaller manufacturers. Fly-ash brick and block units, many near Kosabadi, Transport Nagar and on the roads leading out of the city, take ash from the power stations and press it into bricks using pan mixers, hydraulic presses and conveyors. Fabrication shops make structures and parts for the mines and plants. Flour and dal mills, ice factories, water-packaging and printing units serve the city. Almost all of them work one shift in daylight, with sheds and flat roofs that are mostly unshaded.

Sizes and prices

UnitTypical plantPriceYearly generation
Fly-ash brick plant (single press line)25–40 kW₹12.5–20 lakh36,000–60,000 units
Fabrication shop15–25 kW₹8–13.5 lakh21,000–37,000 units
Flour or dal mill25–50 kW₹12.5–25 lakh36,000–75,000 units
Ice factory or cold room50–100 kW≈ ₹45,000–50,000 per kW72,000–1,50,000 units

Prices include structure, three-phase inverters, protection, LT panel integration, monitoring and approvals.

Sizing to the shift

A factory earns most from solar when nearly every unit generated is used during production. Sunvera reads twelve months of bills and, where possible, checks the load by hour: how much the presses, mixers and motors draw from the start of the shift, what runs at lunch, and what stays on after closing. The plant is sized to the daytime base load in most months, allowing for weekly offs and slow seasons, because surplus exported on those days is worth less than units used in production.

Ash, dust and cleaning

Fly-ash units and their neighbours live with fine dust. Panels near ash handling need cleaning weekly in dry months, and the layout keeps the array upwind and away from loading areas where possible. Walkways and a water point on the roof make cleaning quick, and remote monitoring flags any drop in output. An O&M contract can take over cleaning and checks completely.

Motors, power factor and demand

Units with large motors often face power-factor and demand charges as well as energy charges. Solar cuts the energy units bought; it does not by itself fix a poor power factor or a high recorded demand on a cloudy day. Sunvera's energy audit looks at both, and where useful recommends capacitor correction or shifting flexible loads into solar hours, so the bill falls as far as possible.

Payback and next steps

Factories pay commercial or industrial tariffs and can usually claim accelerated depreciation, so a well-sized plant typically pays back in three to four years. Plants can be financed through term loans. Send twelve months of bills and photos of the roof or shed to +91 77103 07937, and Sunvera Energy will size the plant from its Bilaspur office, with CSPDCL and electrical-inspector approvals included.

Frequently Asked Questions — Solar in Korba

Get a free site survey in Korba

Written generation estimate, exact price after subsidy and bank-finance options — no obligation.