☀ PM Surya Ghar Registered EPC
Wind Turbine Solutions

Wind Turbine Solutions & Solar-Wind Hybrid Systems

Sunvera Energy's wind turbine solutions are small-scale turbines and solar-wind hybrid systems for sites where the wind is genuinely strong and steady — open farmland, hilltops, plateau edges and remote installations that need power at night and through the monsoon, when solar output dips. We are honest about it: across most of Madhya Pradesh and Chhattisgarh, rooftop solar gives more electricity per rupee than wind, so every wind project starts with a site assessment. Where wind does work, combining it with solar smooths generation across the day and the seasons.

When wind makes sense — and when it does not

A small wind turbine's output rises steeply with wind speed: doubling the wind speed increases the available power roughly eightfold. That makes site quality everything. Turbines need clean, unobstructed airflow, typically mounted well above nearby buildings and trees, at a site with consistently good average wind speed. In dense town areas, wind is weak and turbulent, and a turbine on a house roof usually produces little while adding noise and vibration. Open farmland, hill and plateau sites — parts of the Maikal and Amarkantak plateau, open agricultural tracts and isolated ridges — are where small wind has a real chance, especially combined with solar.

SiteWind suitabilityRecommendation
Town house or shop roofPoor — low, turbulent windSolar only
Factory or warehouse in an industrial areaUsually poorSolar only
Open farmland, isolated farmhousePossible — needs assessmentSolar first; wind if assessment supports it
Hilltop, plateau edge, exposed remote siteOften goodSolar-wind hybrid worth assessing

Site assessment first

Before quoting any turbine, Sunvera assesses the site: its exposure to prevailing winds, obstructions within a wide radius, available mounting height, ground conditions for the tower foundation, distance to loads and batteries, and the seasonal wind pattern from available regional data and local observation. Where the decision is significant, a short period of on-site wind measurement can be arranged. The assessment ends with a straight answer — wind, solar, or a hybrid of both — and an estimate of annual output for each option, so the owner can compare cost per unit honestly.

How solar-wind hybrid works

In a hybrid system, a small wind turbine and a solar array both feed a common battery bank through their own charge controllers, and an inverter supplies the load. The two sources complement each other: solar peaks at midday in the dry months, while wind is often stronger in the evenings, at night and during the monsoon, when cloud cover cuts solar output. Together they deliver steadier energy across the day and year than either alone, which means a smaller battery for the same reliability. The system can be off-grid for remote sites or grid-connected where permitted.

Our solar-wind hybrid pilot

Sunvera has installed a 12 kW combined solar-wind hybrid pilot system in rural Chhattisgarh, combining a solar array with small wind generation and battery storage for a site with weak grid supply. The pilot demonstrates how the two sources share the load through the seasons and informs the design of hybrid systems for similar remote and exposed sites. It is listed on the projects page.

What a wind or hybrid system includes

  • Turbine — a small horizontal- or vertical-axis turbine sized to the site and load
  • Tower and foundation — tall enough to clear obstructions, engineered for the site's soil and wind loads, with lightning protection
  • Charge controller with dump load — regulates charging and safely sheds excess energy in high winds
  • Solar array — in hybrid systems, sized to complement the turbine
  • Battery bank and inverter — LFP batteries and an inverter sized to the load
  • Protection and earthing — braking, overspeed protection, surge protection and dedicated earthing

Maintenance — more than solar

Unlike solar panels, a turbine has moving parts. It needs periodic inspection of blades, bearings, the yaw mechanism, tower bolts and guy wires, and checks of the braking system and controller. Turbines on exposed sites face strong gusts in pre-monsoon storms, so tower and foundation checks before the monsoon are essential. Sunvera includes these in a maintenance plan for every wind and hybrid installation, alongside the usual solar checks.

Costs and output — what to expect

Small wind turbines cost more per kilowatt of rated capacity than solar, and the tower and foundation add significantly to the total. Output depends almost entirely on the site: the same turbine can produce several times more energy on an exposed ridge than on a sheltered plot. For that reason Sunvera does not publish a standard price list for wind; each proposal is based on the site assessment, with an estimated annual output and cost per unit set beside the equivalent solar option. In a hybrid design the solar array usually provides most of the annual energy, while the turbine adds evening, night and monsoon generation that reduces battery size and generator use.

An honest comparison

For the great majority of homes, shops, schools and factories in Madhya Pradesh and Chhattisgarh, rooftop solar is simpler, lower-maintenance and cheaper per unit than small wind — and eligible for the PM Surya Ghar subsidy for homes. Wind earns its place at genuinely windy, open or remote sites, and especially as a partner to solar where night-time and monsoon energy matter. If you have such a site, or are unsure, call +91 77103 07937 for an assessment; if solar is the better answer, Sunvera will tell you so.

Frequently Asked Questions

Get a free site survey

Written generation estimate, exact price after subsidy and bank-finance options — no obligation.