If your home already has an inverter and battery for power cuts, you have three ways to add solar: install a separate on-grid system and keep the inverter for backup; replace it with a hybrid system that does both; or add solar charging to the existing set. For most families with reasonable grid supply, the first option is the cheapest and keeps the full PM Surya Ghar subsidy.
Key Takeaways
- Option 1 — on-grid system plus your existing inverter: lowest cost, full subsidy, backup stays as it is.
- Option 2 — hybrid system: one integrated system with battery backup and net metering; costs more.
- Option 3 — solar charging of the existing battery: small, cheap, but no net metering and no subsidy.
- Your existing inverter does not need to be thrown away in option 1.
- Choose by how long and how often your power cuts are.
Why your inverter does not stop you going solar
A home inverter and battery only store grid power for cuts. They do not reduce your bill — in fact they add a little to it, because charging losses mean you buy more units than you use. Rooftop solar does the opposite: it cuts the bill by generating your own units. The two do different jobs, so they can work side by side.
Option 1: separate on-grid system, keep your inverter
An on-grid solar system connects to your main supply through its own grid-tied inverter and a net meter. During the day, solar powers the house and exports the surplus; at night, the grid supplies you as before. Your existing home inverter stays connected to its usual circuits and carries them during cuts, charging from the grid and from solar whenever it runs through the house wiring.
- Cost: the standard on-grid price — about ₹2,00,000 for 3 kW before the ₹78,000 subsidy.
- Subsidy: full PM Surya Ghar subsidy.
- Backup: unchanged — your existing inverter and battery.
- Limitation: the solar system itself switches off during a cut, as all on-grid systems must.
This is the right choice when cuts are short and occasional and your battery is in reasonable health.
Option 2: replace with a hybrid system
A hybrid inverter connects panels, a battery and the grid in one unit. It runs the house on solar in the day, charges the battery, exports surplus through net metering and switches to battery in a cut — while the panels keep charging it. It is one system instead of two, and backup lasts longer because the sun recharges the battery during long daytime cuts.
- Cost: about ₹3–3.5 lakh for 3 kW with a 5 kWh lithium battery.
- Subsidy: available on the grid-connected capacity for residential systems.
- Backup: better, especially for long daytime cuts.
- Your old set: can be retired, sold, or kept on a separate circuit.
Choose this if cuts are long or daily, or if your old battery is near the end of its life anyway.
Option 3: add solar charging to the existing inverter
Some inverters accept a solar charge controller, or can be replaced by a "solar inverter" that charges the same battery from a few panels. This is the cheapest way to use some sunshine, but the energy goes only into the battery and the backup circuits. There is no net metering, the bill falls only slightly, and it does not qualify for the PM Surya Ghar subsidy. It suits homes with very poor supply or where budget allows only a small step.
Comparing the three
| On-grid + existing inverter | Hybrid | Solar charging only | |
|---|---|---|---|
| Bill reduction | Large | Large | Small |
| Subsidy | Yes | Yes, on grid-connected capacity | No |
| Net metering | Yes | Yes | No |
| Backup during cuts | Existing inverter | Battery recharged by solar | Existing battery, solar-charged |
| Cost for 3 kW | ≈ ₹2 lakh before subsidy | ≈ ₹3–3.5 lakh | Lowest |
How to decide
- Look at your cuts: rare and short favour option 1; long and daily favour option 2.
- Check your battery's age: a tired battery tips the balance towards hybrid.
- Check your budget: option 1 gives the best return per rupee.
- Check your connection: subsidy needs a residential connection in your name and adequate sanctioned load.
What happens to your battery bill
An inverter battery charged from the grid costs money every day it is topped up, because charging and conversion losses mean you buy more units than you get back. With option 1, the solar system supplies much of the house during the day, including the units your inverter uses to stay charged, so that hidden cost falls as well. With a hybrid, the battery is charged directly from the panels, so backup becomes almost free to maintain.
Wiring it safely
When an on-grid system and an existing inverter share a house, the wiring must keep them apart correctly: the solar inverter connects on the grid side, and the home inverter continues to feed only its backup circuits. A trained installer checks this, along with earthing for both systems, so that neither back-feeds the other and the DISCOM inspection passes. It is a small detail, but an important one, and it should be part of the survey rather than an afterthought on installation day.
A common mistake
Some installers wire solar panels into an ordinary home inverter that was never designed for them, or sell a large off-grid set to a home with good supply. Both waste money and lose the subsidy. Ask for the system type in writing, and make sure an on-grid or hybrid system comes with net-metering and PM Surya Ghar paperwork.
Ask us
Sunvera Energy installs on-grid and hybrid systems with Waaree, Adani or Tata DCR panels and handles net metering and the subsidy. WhatsApp your electricity bill, a photo of your inverter and battery, and how long your cuts usually last to +91 77103 07937, and we will recommend the right option.
Frequently Asked Questions
Yes. The simplest way is a separate on-grid solar system with net metering, while your existing inverter and battery continue to provide backup during cuts. This keeps the full PM Surya Ghar subsidy.
An ordinary home inverter cannot use solar panels directly. Some models accept a solar charge controller, but that only charges the battery and does not qualify for the subsidy or net metering.
Only if cuts are long or daily. A hybrid recharges its battery from solar during daytime cuts, but costs about ₹3–3.5 lakh for 3 kW against about ₹2 lakh for on-grid before subsidy.
Yes, for residential connections the subsidy applies to the grid-connected capacity of a hybrid system, provided DCR panels and a registered vendor are used.
Get a free site survey & PM Surya Ghar subsidy guidance.


