Industrial solar installation turns idle factory and warehouse roofs into a power plant that supplies daytime production load at a fraction of the grid tariff. Sunvera Energy designs and builds 50–500 kW rooftop and ground-mounted plants for factories, rice mills, cold storages and warehouses across Madhya Pradesh and Chhattisgarh as a full EPC — engineering, procurement, construction, approvals and maintenance under one contract. Industrial tariffs of ₹8–11 a unit and daytime operating hours typically give a payback of three to four years, and a 75 kW warehouse plant Sunvera built in Bilaspur shows the model in practice.
Why industry is the strongest case for solar
An industrial unit buys more electricity than any home or shop, pays one of the highest tariffs, and uses most of it in the hours the sun is up. Every unit a rooftop plant generates during a shift replaces a unit that would have cost ₹8–11 from the grid. Large sheet roofs over production halls, godowns and mills are usually unused space, so the plant needs no extra land. And the output is predictable: in Madhya Pradesh and Chhattisgarh, each kW of capacity produces about 1,450–1,550 units a year, so a 200 kW plant delivers close to 3 lakh units annually — a figure finance teams can model with confidence.
Industrial solar price and returns (2026)
| Plant size | Roof area | Indicative cost | Annual generation | Annual saving at ₹9/unit | Simple payback |
|---|---|---|---|---|---|
| 50 kW | ≈ 5,000 sq ft | ₹22.5–25 lakh | 72,000–75,000 units | ≈ ₹6.6 lakh | ≈ 3.6 yrs |
| 100 kW | ≈ 10,000 sq ft | ₹45–50 lakh | 1.45–1.5 lakh units | ≈ ₹13.3 lakh | ≈ 3.6 yrs |
| 200 kW | ≈ 20,000 sq ft | ₹88–96 lakh | 2.9–3 lakh units | ≈ ₹26.5 lakh | ≈ 3.5 yrs |
| 500 kW | ≈ 50,000 sq ft | on design | 7.2–7.5 lakh units | ≈ ₹66 lakh | ≈ 3.3 yrs |
Costs include tier-1 modules from Waaree, Adani or Tata, three-phase string inverters, galvanised or non-penetrative structures, DC and AC cabling, protection panels, earthing and lightning protection, SCADA-style remote monitoring on larger plants, installation, commissioning and approvals. Savings assume most output is consumed on site; the proposal models your actual load profile. Accelerated depreciation on the asset — confirm the current rate with your chartered accountant — shortens the effective payback further.
Engineering a plant that lasts 25 years
- Structural check first. Before layout, the roof purlins and sheets are assessed for the added load (about 15–20 kg per sq m) and the region's wind loads. Weak sheds are reinforced or a ground-mounted array is proposed.
- Non-penetrative mounting. Clamps grip the sheet profile instead of drilling, so the roof stays watertight and its warranty intact.
- Walkways and cleaning access. Large arrays get walkways and a water line so panels can be cleaned without walking on them — vital in dusty industrial belts.
- String design and inverters. Strings are matched to roof orientation; inverters are placed near the array, shaded and ventilated, with remote monitoring.
- Protection. Proper DC and AC protection panels, surge protection, earthing pits and lightning arresters for central India's pre-monsoon storms.
Sizing to your production load
The economics depend on self-consumption. Sunvera sizes an industrial plant from twelve months of bills and, where available, the meter's 15-minute load data, so the plant's output on a sunny Sunday or holiday does not swamp a factory that is shut. Mills with seasonal operation — rice mills after the kharif harvest, cold storages in summer — are modelled month by month. Where the roof could take more than the load justifies, the proposal says so and recommends the smaller, better-returning size, with the option to add capacity later.
Approvals and metering for industrial plants
Industrial plants are connected under the MPERC rules in Madhya Pradesh (MPMKVVCL, MPPKVVCL) and the CSERC rules in Chhattisgarh (CSPDCL). The file includes the single-line diagram, structural certificate, inverter grid-compliance certificates and load details; above set capacities, approval from the electrical inspector is required before commissioning. Depending on the connection and policy in force, the plant is net-metered or set up for captive consumption. Sunvera prepares and files every document and coordinates inspections; industrial approvals typically take six to ten weeks alongside a two-to-four-week build.
Operation and maintenance for industrial plants
An industrial plant only earns its payback if it keeps generating at the designed level, and industrial sites are hard on solar: dust from cement, coal, husk or road traffic settles quickly, and a dirty array can lose 10–20 per cent of output within weeks. Sunvera's industrial O&M contracts include a cleaning schedule set to the site's dust level, remote monitoring that compares each inverter's output against expected generation for the day's sunshine, quarterly thermal and electrical inspection of strings, connectors and protection panels, an annual earthing and structure check, and priority breakdown response. A monthly report shows generation, savings and any losses found, so the finance team can track returns against the original proposal.
Plants are also designed for expansion. If production grows, a second inverter block can be added to the same structure and metering, provided the sanctioned load and roof allow it — the original layout leaves room for that where possible.
Where Sunvera builds industrial plants
Rice mills in the Balaghat, Bhatapara, Janjgir-Champa and Bilaspur–Mungeli belts; cold storages and warehouses near the Guna mandi and the Korba mining area; workshops and ancillaries in the Baloda Bazar cement belt; and units in industrial areas such as Malanpur (Gwalior), Mandideep (Bhopal) and Sirgitti (Bilaspur). Sunvera's completed 75 kW warehouse plant in Bilaspur and commercial work across 22 districts are run from four offices — Pichhore (Shivpuri), Gwalior, Balaghat and Bilaspur. Send twelve months of bills to +91 77103 07937 for a preliminary plant size and return estimate.
Frequently Asked Questions
Roughly ₹22.5–25 lakh for 50 kW, ₹45–50 lakh for 100 kW and ₹88–96 lakh for 200 kW, with the per-kW cost falling as size rises. Prices include tier-1 modules, inverters, structure, cabling, protection, monitoring, installation and approvals.
Typically three to four years at industrial tariffs of ₹8–11 per unit, provided most output is consumed during production hours. Accelerated depreciation on the plant shortens the effective payback for profit-making businesses; the plant then runs for 25 years or more.
Yes. Non-penetrative clamps grip the sheet profile rather than drilling through it, so the roof stays watertight. Sunvera checks the purlins and sheets for the added load of about 15–20 kg per sq m before design, and proposes reinforcement or a ground-mounted plant if needed.
From twelve months of bills and, where available, 15-minute meter load data, so the plant's output is consumed during working hours rather than exported. Seasonal operations such as rice mills and cold storages are modelled month by month.
DISCOM feasibility and connection approval under MPERC or CSERC rules, a single-line diagram and structural certificate, inverter grid-compliance certificates and, above set capacities, electrical-inspector approval. Sunvera prepares and files all of them.
Yes. Sunvera offers O&M contracts with scheduled cleaning, quarterly generation reviews against expected output, inverter and protection checks, and priority breakdown response from the nearest office.
Written generation estimate, exact price after subsidy and bank-finance options — no obligation.