☀ PM Surya Ghar Registered EPC
Chhattisgarh · North Chhattisgarh

Solar for Factory in Bilaspur — Small and Medium Units in Tifra and Sirgitti

Solar for factory in Bilaspur is often a decision for a small owner rather than a large company. Units in Tifra and Sirgitti — furniture and steel fabrication, printing presses, food processing, plastics, spice grinding, water packaging — usually run one shift on a three-phase connection with a modest contract demand, and the owner signs the bill personally every month. For these units, a 10–50 kW plant costing about ₹5.5–25 lakh can take a large bite out of the energy charge, typically paying back in three to four years. Sunvera Energy designs them from its office on Seepat Road, close enough for quick visits during and after installation.

Small units, big bills

Across Bilaspur, a fabrication shop in Sirgitti with welding sets, cutters and a compressor, a printing press in Tifra running offset machines, or a spice-grinding unit with pulverisers can easily spend tens of thousands of rupees a month on electricity. Most work from morning to evening, under sheet or RCC roofs that receive full sun. That is the profile where solar works best: steady daytime use, high tariffs, and an owner who sees every rupee saved.

Sanctioned load and contract demand

Before sizing a plant, the bill is checked for sanctioned load or contract demand. Solar capacity generally cannot exceed what the connection allows, so a unit on a 20 kW connection may need an enhancement before a 30 kW plant can be connected. Sunvera files any enhancement with CSPDCL alongside the solar application. The audit also looks at power factor, since motor-heavy units are often charged for poor power factor, which solar alone does not fix.

Sizes and prices

UnitTypical plantPriceYearly generation
Printing press or spice-grinding unit10–15 kW₹5.5–8 lakh14,500–22,000 units
Furniture or steel fabrication shop15–25 kW₹8–13.5 lakh21,000–37,000 units
Food processing or packaging unit25–50 kW₹12.5–25 lakh36,000–75,000 units

Designed for motors and sheds

Factory loads are three-phase and often motor-heavy, so three-phase inverters spread the solar output evenly across phases and integrate with the unit's distribution board. On sheet roofs, clamp-on rails avoid drilling; on RCC roofs, galvanised frames are anchored without breaking waterproofing. Cables are routed away from heat and moving machinery, and earthing and surge protection are sized for the plant.

Payback and finance

Factories pay commercial or industrial tariffs and can usually claim accelerated depreciation, so a plant sized to the shift load typically pays back in three to four years. Term loans from banks such as SBI, HDFC Bank, PNB and Bank of Baroda can finance it, and in many cases the monthly saving covers most of the instalment. Sunvera prepares a payback model for the owner and their chartered accountant.

Ask for a factory survey

Send twelve months of bills and photos of the roof to +91 77103 07937, or bring them to the office in front of Hanu Traders, Nutan Chowk, Seepat Road. Sunvera Energy will check your connection, size the plant to your shift and handle CSPDCL and electrical-inspector approvals.

Frequently Asked Questions — Solar in Bilaspur

Get a free site survey in Bilaspur

Written generation estimate, exact price after subsidy and bank-finance options — no obligation.