Solar for rice mill in Bilaspur suits one of the district's most important industries. Mills along the Bilaspur–Mungeli road, around Takhatpur and Bilha, and on the city's edges near Sirgitti and Tifra run hullers, whiteners, polishers, graders, elevators and dryers through long daylight shifts, much of it on paddy received for custom milling after the government's kharif procurement. Electricity is the biggest running cost after labour. A 50–100 kW rooftop plant costs about ₹45,000–50,000 per kW and generates about 1,450–1,500 units per kW a year. Sunvera Energy designs mill plants from its Bilaspur office, with its own 75 kW warehouse plant in the city as a reference.
Custom milling and the load curve
After the kharif harvest, paddy procured by the state is allotted to mills for custom milling, and mills run hard for months to deliver rice on schedule. Later in the year, milling slows to private trade. A solar plant generates fairly evenly through the year. Sizing the plant to the peak custom-milling months would leave a large surplus in lean months, exported at a low settlement value. Sizing it to the daytime load the mill carries in most months keeps nearly all generation in use. Twelve months of bills show where that level lies.
Sizes and prices
| Mill daytime load (most months) | Recommended plant | Price | Units a year |
|---|---|---|---|
| 30–40 kW | 40 kW | ≈ ₹18–20 lakh | 58,000–60,000 |
| 50–70 kW | 60 kW | ≈ ₹27–30 lakh | 87,000–90,000 |
| 80–120 kW | 100 kW | ≈ ₹45–50 lakh | 1.45–1.5 lakh |
Roof, stock and dryers
Mill godowns hold paddy and finished rice, so the roof must stay watertight. Clamp-on rails grip the sheet profile without drilling. Before installation, sheets and purlins are checked, and weak sheets replaced. Cable routes avoid the hot dryer zone, and inverters are placed in a cool, ventilated spot near the LT panel. Husk and bran dust settle on panels, so walkways and a water point allow weekly cleaning in the dry milling months.
Seeing a working plant
Mill owners on the Mungeli road can visit Bilaspur and ask to review monitoring data from Sunvera's 75 kW warehouse rooftop plant in the city, which produces roughly 1,05,000–1,15,000 units a year on a sheet roof with non-penetrative mounting. It shows the real month-by-month output a mill plant of similar size can expect.
Payback, tax and finance
Mills pay industrial or commercial tariffs and can usually claim accelerated depreciation, so a correctly sized plant typically pays back in three to four years. Term loans from banks such as SBI, HDFC Bank, PNB and Bank of Baroda can finance the plant, and in many cases the monthly saving covers most of the instalment. Sunvera prepares a payback model for the owner and their chartered accountant.
Request a mill proposal
Send twelve months of electricity bills and photos of the shed roof to +91 77103 07937, or visit the office in front of Hanu Traders, Nutan Chowk, Seepat Road. Sunvera Energy will size the plant to your mill's real load and handle CSPDCL and electrical-inspector approvals, with O&M available after commissioning.
Frequently Asked Questions — Solar in Bilaspur
About ₹45,000–50,000 per kW for 50–100 kW plants — roughly ₹18–20 lakh for 40 kW, ₹27–30 lakh for 60 kW and ₹45–50 lakh for 100 kW — including mounting, inverters, protection, monitoring and approvals.
Usually not. Sizing to the daytime load the mill carries in most months keeps nearly all output in use; a peak-sized plant exports much of its output in lean months at a low settlement value.
Not with non-penetrative mounting, which clamps onto the sheet profile without drilling, keeping stored paddy and rice dry. Weak or rusted sheets should be replaced before installation.
Yes. Sunvera's 75 kW warehouse rooftop plant in Bilaspur produces roughly 1,05,000–1,15,000 units a year, and mill owners can ask to review its monitoring data.
Typically three to four years at industrial or commercial tariffs when the plant is sized to the daytime load the mill carries in most months, and shorter once accelerated depreciation is claimed. Sunvera prepares a payback model for the owner and their chartered accountant to review.
Written generation estimate, exact price after subsidy and bank-finance options — no obligation.