☀ PM Surya Ghar Registered EPC
Chhattisgarh · North Chhattisgarh

Solar for Rice Mill in Korba — Sized to the Milling Season

Solar for rice mill in Korba helps mills in Katghora, Pali and around Korba city cut the largest cost after paddy itself: electricity for hullers, polishers, graders, elevators and dryers. Mills run hard in the months after the kharif harvest and procurement, and slower afterwards, so the key to a good plant is sizing it to the load the mill carries in most months, not the peak. Plants of 50–100 kW cost about ₹45,000–50,000 per kW on sheet roofs, generate about 1,450–1,500 units per kW a year, and typically pay back in three to four years before tax benefits. Sunvera Energy designs and installs mill plants from its Bilaspur office, and mills on the Transport Nagar side of Korba city and around Kosabadi are covered on the same trips.

A mill's year and a solar plant's year

After the paddy harvest and procurement, mills run long shifts for months; later in the year, milling slows. A solar plant produces fairly evenly across the year, with its best months in late winter and spring. If the plant is sized to the busiest month, a large share of its output is exported in lean months at a low settlement value. If it is sized to the daytime load the mill carries in most months, nearly all of it is used on site. Sunvera reads twelve months of bills to find that level.

Sizes and prices

Mill daytime load (most months)Recommended plantPriceUnits a year
30–40 kW40 kW≈ ₹18–20 lakh58,000–60,000
50–70 kW60 kW≈ ₹27–30 lakh87,000–90,000
80–120 kW100 kW≈ ₹45–50 lakh1.45–1.5 lakh

Prices include non-penetrative mounting, three-phase inverters, protection, LT panel integration, monitoring and approvals.

Protecting the roof and the stock

Mill sheds store paddy and finished rice, so a leaking roof is not an option. Panels are fixed with clamps that grip the sheet profile without drilling. Before installation, sheets and purlins are checked; old, rusted sheets are best replaced first. Walkways allow cleaning without stepping on sheets, and cable routes avoid hot dryer zones.

Dust and husk

Mills produce husk and bran dust, and Korba adds coal dust and fly ash. Both settle on panels. Regular cleaning — weekly in the dry milling months — keeps generation close to expected, and monitoring shows when it starts to fall. An O&M contract can take this over completely.

Payback, tax and finance

Mills pay industrial or commercial tariffs and can usually claim accelerated depreciation, so a well-sized plant typically pays back in three to four years. Plants can be financed through term loans from banks such as SBI, HDFC Bank, PNB and Bank of Baroda; Sunvera prepares a payback model for the owner and their chartered accountant, and can show monitoring data from its 75 kW warehouse plant in Bilaspur.

Request a mill proposal

Send twelve months of electricity bills and photos of the shed roof to +91 77103 07937. Sunvera Energy will size the plant to your mill's real load and handle CSPDCL and electrical-inspector approvals from its office in front of Hanu Traders, Nutan Chowk, Seepat Road, Bilaspur.

Frequently Asked Questions — Solar in Korba

Get a free site survey in Korba

Written generation estimate, exact price after subsidy and bank-finance options — no obligation.