A solar energy audit in Shivpuri answers three questions before you spend a rupee: how big a system you need, whether your connection and roof allow it, and how much you will really save. Sunvera Energy starts with twelve months of MPMKVVCL bills — brought to the head office at Pichhore or sent on WhatsApp — and adds a free roof survey anywhere in the district. For most town homes using 4,300–4,500 units a year the answer is 3 kW at ₹1,80,000–2,00,000, or about ₹1,02,000–1,22,000 after the ₹78,000 central subsidy; for a low-use village home, it may honestly be 1 kW, or a smaller saving than you expected.
What we read on your MPMKVVCL bill
- Units consumed each month — added up for a full year, because Shivpuri use swings from about 150 units in January to 550 or more in May for a home with an AC.
- Sanctioned load — the solar capacity under net metering generally cannot exceed it, and many older connections in the district were sanctioned at 1–2 kW.
- Tariff category — domestic or non-domestic; this decides both the subsidy and the value of every unit solar replaces.
- Name and consumer number — the PM Surya Ghar subsidy needs the connection in the applicant's name, matching the bank account.
- Fixed charges and arrears — fixed charges remain even after solar, and arrears must be cleared before net metering.
When solar saves less than you think
An honest audit sometimes gives a smaller number. Madhya Pradesh supports low-consumption households through a subsidised tariff scheme, so a village home in Pohri or Badarwas using well under 100 units a month may already be paying very little. Solar still works for such a home, but the saving is smaller and the payback longer, and a 1 kW system is usually the most that makes sense. The audit shows this in rupees, so the family can decide with real numbers rather than an advertisement. Homes using 250 units a month or more — the coolers-and-AC homes around Madhav Chowk, Court Road and the bypass colonies — are where solar pays back fastest.
On the roof
The survey measures usable roof area — about 100 sq ft per kW — and walks the roof at the angle of the low winter sun to find shadows from the water tank, stair room, a neighbour's upper floor or a neem tree. It notes how the roof is used: many Shivpuri families dry grain and papad, store things or sleep on the terrace in summer, and an elevated structure can keep that space free. It checks old stone-slab roofs, which need a different mounting method from RCC, and finds a route for cables and a shaded wall for the inverter.
The business audit
For shops on Sadar Bazaar and Gandhi Chowk, clinics, schools, hotels and small units, the audit goes further. It splits twelve bills into energy, demand and fixed charges, studies the load hour by hour on a working day, lists the circuits that must keep running during a cut, and checks large motors and power factor. A Shivpuri example: a diagnostic clinic near Court Road wanted 25 kW because its summer bill was high. The audit found that its daytime base load was closer to 12 kW, and that only the lab analysers and reception needed backup. It installed a 12 kW on-grid plant for savings and a small battery section for the critical circuits — at well under the cost of the original idea.
What you receive
A written proposal with the system size and type, a roof layout, month-by-month generation, expected saving, payback, the net cost after subsidy for homes, and a zero-down-payment EMI if you want one. For businesses, the payback model includes the effect of accelerated depreciation for your chartered accountant to confirm. You can take the proposal to your bank, compare it with other quotations, or simply keep it.
Start with your bills
Walk into the head office at Rannod Road, Bijasen Mandir Colony, Pichhore with your MPMKVVCL bills, or WhatsApp clear photos of twelve bills to +91 77103 07937. The bill review is done the same day and a free site visit anywhere in Shivpuri district is booked within days.
Frequently Asked Questions — Solar in Shivpuri
It is a review of twelve months of your MPMKVVCL bills, your sanctioned load, tariff category and roof, done before you buy. Sunvera Energy uses it to recommend the right system size and type and to calculate your real saving, payback and net cost after subsidy.
Add the units on twelve months of bills and divide by about 1,450–1,500, which is what each kW produces in a year in Shivpuri. A home using 4,400 units a year needs about 3 kW. Then check that your sanctioned load and roof space allow that size.
Because May is the month of highest use. A system sized to May will export large surpluses in winter, which are settled at a lower rate than the units you buy. A full year of bills gives a size that covers your real use without wasting money on extra panels.
It can still help, but the saving is smaller, because low-consumption homes in Madhya Pradesh may already pay a subsidised bill. A 1 kW system is usually the most that makes sense. The audit shows the saving and payback in rupees so you can decide.
For homes, the bill review and site survey anywhere in Shivpuri district are free and carry no travel charge. Detailed hour-by-hour load studies for larger businesses and institutions are discussed and quoted before any work begins.
Written generation estimate, exact price after subsidy and bank-finance options — no obligation.