Solar for hospitals solves two problems at once: electricity is one of a hospital's largest running costs, and power cuts put patients at risk and force expensive diesel generators to run. Sunvera Energy designs on-grid and hybrid systems for hospitals, nursing homes, clinics, diagnostic centres and labs across Madhya Pradesh and Chhattisgarh — on-grid panels to cut the daytime bill, and lithium battery backup on critical circuits so equipment, lighting and medicine refrigeration ride through outages without a flicker. Sunvera has already installed a 10 kW hybrid system for a hospital in Gwalior.
Why hospitals benefit more than most buildings
A hospital's electricity load is large, constant and concentrated in the day: operation-theatre lights and equipment, X-ray and ultrasound, air-conditioning for wards and ICUs, autoclaves and sterilisers, pathology analysers, lifts and water pumps. Most of it is billed on a commercial or institutional tariff of ₹8–11 a unit, so every unit a rooftop plant generates during the day saves the full rate. And because outages in a hospital are not an inconvenience but a safety issue, many hospitals run diesel generators for hours every month — the most expensive electricity there is, at ₹25–35 a unit once fuel, maintenance and wear are counted.
The design: on-grid savings, hybrid safety
Sunvera designs hospital systems in two layers. The savings layer is an on-grid array sized to the daytime base load, net-metered through MPMKVVCL, MPPKVVCL or CSPDCL, cutting the monthly bill. The safety layer is a hybrid inverter and lithium battery bank connected only to a separate critical-load board — ICU and ward equipment, OT lighting, medicine and vaccine refrigerators, nurse-call and IT, emergency lighting. When the grid fails, the critical board switches to battery in under 20 milliseconds, faster than equipment can notice. The generator stays as the last line of defence for long outages and starts far less often.
Separating the two layers keeps the battery — the expensive part — sized to what truly must run, rather than the entire building.
Sizes and indicative costs
| Facility | Typical design | Indicative cost | Annual saving |
|---|---|---|---|
| Clinic or diagnostic centre | 5–10 kW, hybrid with 10–15 kWh | ₹4.5–9.5 lakh | ₹60,000–1.25 lakh + diesel |
| Nursing home, 20–30 beds | 15–25 kW on-grid + 10 kW hybrid for critical board | ₹16–24 lakh | ₹2–3.5 lakh + diesel |
| Hospital, 50–100 beds | 50–100 kW on-grid + 20–30 kW hybrid | on design | ₹6–13 lakh + diesel |
Costs include tier-1 panels from Waaree, Adani or Tata, grid-tied and hybrid inverters, LFP battery bank with management system, structure, protection, a dedicated critical-load distribution board, installation, commissioning and DISCOM approvals. Savings exclude the diesel no longer burned, which often adds substantially to the return. Private hospitals can claim accelerated depreciation; charitable and trust hospitals often fund the system through donor drives, for which Sunvera provides a proposal document.
Our 10 kW hospital project in Gwalior
For a hospital in Gwalior, Sunvera installed a 10 kW hybrid solar system with lithium battery backup. During the day the panels supply the hospital's load and charge the battery; at night the grid takes over; and during outages the critical circuits run from the battery while the diesel generator stays off for most cuts. Gwalior's summer temperatures above 45 °C make the cooling and refrigeration load heavy, which is exactly when the panels produce most. The project is described on the projects page, and the same design scales to larger facilities.
Installing without disturbing patients
Rooftop work is planned around the hospital: material is lifted outside OPD hours, noisy work avoids quiet hours, and electrical tie-ins are done in short, scheduled windows with the generator running so no ward loses power. The critical-load board is wired and tested before switchover, and staff are briefed on what the inverter display shows. Commissioning includes a deliberate outage test with the hospital's engineer present, so everyone sees the changeover work before relying on it.
What to include on the critical-load board
The battery is the expensive part, so the critical board should carry only what truly must not stop. A typical list, agreed with the hospital's medical and maintenance staff:
- ICU and HDU monitors, ventilators' supply circuits, infusion pumps and suction
- Operation-theatre lights and OT equipment circuits
- Medicine, vaccine and blood-bank refrigeration
- Emergency and corridor lighting, nurse-call, fire alarm and CCTV
- Pharmacy and billing IT, network and server
Large intermittent loads — central AC, imaging machines, lifts, autoclaves — usually stay on the generator for long outages, because carrying them on battery would multiply the battery cost. The design document lists every circuit and its load, so the hospital knows exactly what runs on battery and for how long.
Maintenance and monitoring
Hospitals cannot wait for a fault to be noticed. Sunvera's O&M contract for healthcare includes remote monitoring of generation and battery health, scheduled panel cleaning, quarterly inspection of inverters, protection and earthing, an annual battery capacity test and priority breakdown response from the nearest office — Pichhore (Shivpuri), Gwalior, Balaghat or Bilaspur. To start, share twelve months of electricity bills, monthly diesel consumption and a list of critical equipment at +91 77103 07937.
Frequently Asked Questions
Yes — hospitals have heavy daytime loads on commercial tariffs and costly diesel backup, so solar cuts both the bill and generator use. A hybrid design with a lithium battery on critical circuits also keeps equipment running through outages, switching over in under 20 milliseconds.
With a hybrid system on a dedicated critical-load board, yes — ICU equipment, OT lighting, medicine refrigeration and emergency lighting switch to battery in under 20 milliseconds. The diesel generator remains as the last line of defence for very long outages.
A 20–30 bed nursing home typically needs 15–25 kW on-grid plus about 10 kW hybrid for critical circuits, costing roughly ₹16–24 lakh. It saves ₹2–3.5 lakh a year in electricity plus the diesel no longer burned.
Yes — a 10 kW hybrid solar system with lithium battery backup for a hospital in Gwalior. The panels supply daytime load and charge the battery, and critical circuits run from the battery during outages while the generator stays off for most cuts.
Yes. Rooftop work is scheduled outside OPD and quiet hours, electrical tie-ins are done in short planned windows with the generator running, and a deliberate outage test is carried out with the hospital's engineer before the system is relied on.
The PM Surya Ghar subsidy is for homes only. Private hospitals claim accelerated depreciation on the system; charitable and trust hospitals often fund it through donor drives, for which Sunvera prepares a proposal document.
Written generation estimate, exact price after subsidy and bank-finance options — no obligation.