Solar for petrol pumps turns the forecourt canopy and sales building roof into a 10–20 kW power plant that runs the dispensers, canopy lighting, air compressor, convenience store and office through the day. Fuel stations pay commercial tariffs of ₹8–11 a unit and run 16–24 hours, so the daytime share of their load is a strong solar case — and oil marketing companies increasingly encourage dealers to show green initiatives at their outlets. Sunvera Energy designs fuel-station systems for highway and town outlets across Madhya Pradesh and Chhattisgarh, with inverters and electrical equipment kept outside the hazardous zone.
Where a petrol pump uses electricity
| Load | Typical demand | Hours |
|---|---|---|
| Fuel dispensers (pumps, displays, automation) | 3–8 kW | 16–24 hours |
| Canopy and forecourt lighting | 2–4 kW | Night, plus overcast days |
| Air compressor, water pump | 2–4 kW | Intermittent, daytime heavy |
| Sales building, office, AC, store, ATM | 4–10 kW | Mostly daytime and evening |
A busy highway outlet can use 2,000–3,500 units a month. The daytime portion — dispensing, compressor, office and store cooling — is what a 10–20 kW plant offsets directly; canopy lighting at night is covered by net-metering credits from the day.
Canopy-mounted and roof-mounted panels
The forecourt canopy is usually a large, flat, unshaded steel structure — but it was not designed to carry panels. Sunvera first checks the canopy's structural capacity with the dealer's drawings or a site assessment; where it can take the load, lightweight rails are fixed to the canopy frame without breaching its sheeting. The sales building roof, and sometimes a separate car-park or air-and-water bay shade, carry the rest. On many outlets, 10–15 kW fits on the canopy and building together; larger highway plazas with service bays and restaurants can host 20–30 kW.
Safety at a fuel station — non-negotiable
Areas around dispensers, fill points and tank vents are classified as hazardous because of petroleum vapour, and electrical equipment there must meet strict standards. Sunvera's fuel-station design keeps the inverter, DC combiner boxes, isolators and any battery outside the hazardous zone — typically in or beside the sales building — and routes DC cabling from the canopy in protected conduit along approved paths. Earthing is bonded to the outlet's existing earthing system, and lightning protection is coordinated with it. Installation work near dispensers is done with the outlet's safety officer, with no hot work in classified areas. Dealers should keep their oil marketing company informed and follow its outlet guidelines and any approvals it requires before installation.
Indicative cost and returns
| Plant | Typical outlet | Installed cost | Annual generation | Annual saving at ₹9/unit |
|---|---|---|---|---|
| 10 kW | Town outlet, 2 dispensers | ₹5.5–6 lakh | 14,500–15,000 units | ≈ ₹1.3 lakh |
| 15 kW | Busy town or highway outlet | ₹8–9 lakh | 21,500–22,500 units | ≈ ₹2 lakh |
| 20–30 kW | Highway plaza with store and service bay | ₹10–15 lakh | 29,000–45,000 units | ≈ ₹2.6–4 lakh |
Costs include tier-1 panels from Waaree, Adani or Tata, inverter, canopy and roof structure, protected cabling, protection, earthing, installation, commissioning and DISCOM net-metering approval. Canopy strengthening, if needed, is quoted separately after assessment. Dealers on a business connection can claim accelerated depreciation.
Practical points for dealers
- Outlet ownership. Many outlets are on land or structures owned by the oil company; the dealer should confirm who owns the canopy and sales building before planning panels on them.
- Connection category. Most outlets are on a non-domestic or commercial connection, which can be net-metered up to its sanctioned load; check the load on the bill.
- Night load. Canopy lighting is a night-time load; LED lighting retrofits often cut it by half and are worth doing alongside solar.
- Cleaning. Exhaust and road dust settle fast on canopies near the highway; schedule cleaning every one to two weeks in the dry season.
- Insurance. Inform the outlet's insurer about the installation so cover extends to the new equipment.
Branding and customer perception
Oil marketing companies have been promoting solar at retail outlets as part of their own clean-energy commitments, and a visible canopy array signals a modern, well-run outlet to customers and to the company's area officers. A small display near the sales counter showing the day's solar generation reinforces it. For highway plazas with restaurants and rest areas, the same plant also powers the restaurant's kitchen refrigeration, lighting and air-conditioning during the day, and the inverter and metering can be planned with room for added capacity if the plaza expands.
Hybrid for highway outlets with frequent cuts
Highway outlets on rural feeders often run a DG set through outages to keep dispensing. A hybrid design adds a lithium battery, located outside the hazardous zone, that carries the dispensers, POS terminals, canopy lighting and CCTV through short cuts, so the generator starts only for long outages. Battery size is set by the outlet's outage log rather than guesswork.
Approvals and next steps
Net-metering applications go through MPMKVVCL or MPPKVVCL in Madhya Pradesh and CSPDCL in Chhattisgarh, with a single-line diagram and load details prepared by Sunvera; approvals typically take four to eight weeks. Work is scheduled at the quietest hours to keep the forecourt operating. The AMC covers cleaning — vehicle exhaust and road dust settle quickly on canopies — and quarterly inspection of cabling and earthing. Send twelve months of bills, a photo of the canopy and the outlet layout to +91 77103 07937 for a proposal.
Frequently Asked Questions
Often yes, if the canopy's structure can carry the extra load. Sunvera assesses the canopy first, then fixes lightweight rails to its frame without breaching the sheeting. The sales-building roof usually carries the rest of the panels.
Yes, when designed correctly. The inverter, combiner boxes, isolators and any battery are placed outside the hazardous zone around dispensers and tank vents, DC cables run in protected conduit, and earthing is bonded to the outlet's system. Dealers should also follow their oil company's outlet guidelines.
Usually 10–20 kW for a town or highway outlet, and 20–30 kW for a highway plaza with a store and service bay. Sunvera sizes from twelve months of bills so that the daytime load absorbs most of the output.
A 15 kW plant costing ₹8–9 lakh generates about 21,500–22,500 units a year, saving roughly ₹2 lakh at ₹9 per unit — a payback of around four to four and a half years, with accelerated depreciation available to the business.
The DISCOM approves net metering, and the dealer should keep the oil marketing company informed and follow its outlet guidelines, especially where the canopy or building belongs to the company. Sunvera prepares the electrical documents and a layout showing that all equipment sits outside the hazardous zone.
With a hybrid design, yes for short cuts: a lithium battery outside the hazardous zone carries dispensers, POS, canopy lighting and CCTV, so the DG set starts only for long outages.
Written generation estimate, exact price after subsidy and bank-finance options — no obligation.